Single implant crown: complete 3-month journey


When a tooth is missing, a dental implant remains the gold standard solution for replacing it in a durable and independent way, without affecting neighboring teeth. But beyond the decision to place an implant, many patients wonder how the process actually unfolds. How many visits? How long does it take? With or without a temporary tooth?

At Dental Swiss Clinics in Montreux, the typical journey for a single implant takes place over approximately 3 months with 4 visits. Here is the detail of each step.

First of all: the initial evaluation

Before implant placement, a complete evaluation is systematically performed: clinical examination, panoramic X-ray, and a cone beam CT scan in most cases to precisely assess the available bone volume and the proximity of anatomical structures (inferior alveolar nerve, maxillary sinus).

This step confirms that an implant is the right indication, that no local or general contraindications exist, and that a precise treatment plan can be established.

Step 1: Implant placement

Session duration: approximately 30 minutes for a simple implant
Anesthesia: local with articaine

Implant placement is a short and well-tolerated procedure. Under local anesthesia with articaine, the implant (titanium screw) is inserted into the bone at the planned location. The technique is precise, guided by prior digital planning that guarantees optimal positioning.

For a single implant in a healed site, the procedure is generally painless during and after, with straightforward recovery (moderate swelling for a few days, no significant pain in the majority of cases).

Special case: recently infected site
If the replaced tooth was extracted due to an infection (abscess, cyst, severe periodontitis), an additional healing period is observed before the implant is placed. Standard bone physiology requires 3 months for a healthy healed site. For a site that was infected, we wait 4 months to ensure complete resolution of the pathology and optimal tissue regeneration.

Immediate implantation
Immediate implantation (placing the implant on the day of tooth extraction) is possible, but it remains rare in my practice. It requires very favorable clinical conditions (absence of infection, preserved bone volume, high primary stability). In the majority of situations, a delayed approach remains safer and more predictable.

Step 2: 1-week check-up

Duration: short, a few minutes

A follow-up visit is systematically scheduled one week after placement. It allows for checking initial gingival healing, removing sutures if necessary, and ensuring that everything is progressing normally.

Between this visit and the next, the implant will integrate with the bone over the next three months. This process is called osteointegration. It is a biological step that cannot be artificially accelerated. The patient resumes a normal life during this period, with limited precautions in the implanted area.

Step 3: Digital impression at 3 months

Duration: approximately 30 minutes

Three months after placement (or four months for an initially infected site), the patient returns for the impression-taking stage. This step marks the transition from the surgical phase to the prosthetic phase.

A small component called a scanbody is screwed onto the implant. It allows the intraoral scanner to precisely capture the three-dimensional position of the implant in the mouth, as well as the morphology of neighboring teeth and the occlusal relationship.

This digital impression completely replaces the traditional silicone-based impression. The patient benefits from significantly higher comfort: no material to bite into, no unpleasant sensation, no gagging. The data is recorded in a few minutes.

Step 4: Placement of the final crown at 3 months + 1 week

Duration: approximately 30 minutes

One week after the impression is taken, the final crown is ready. It is made of ceramic, designed to faithfully reproduce the shape, shade, and function of the missing tooth. It is either screwed or cemented onto the implant depending on the clinical case, precisely adjusted for occlusion, and polished for optimal comfort.

The patient leaves with their final tooth, fully functional and aesthetic. The journey is complete.

Why I do not perform the crown in a single visit

Our integrated digital workflow theoretically allows us to design and manufacture a crown in a single visit, as we do for crowns on natural teeth. At the beginning of my practice, I did indeed perform 100% of implant crowns in one visit.

Today, I have chosen to systematically perform them in two visits, and here is why.

The fabrication of an implant crown requires the use of a 3D-printed model, an intermediate step that guarantees the precision of the fit between the crown and the implant. This precision is particularly critical to avoid long-term mechanical and biological problems (loosening, peri-implant bone loss).

Performing both steps in one session means either compressing time at the expense of precision or extending the session in a way that is uncomfortable for the patient. Performing it in two sessions, one week apart, yields a better clinical result with better patient comfort.

This evolution in my practice reflects a simple principle: the quality of the result takes precedence over the speed of execution, even when technology would allow for a faster process.

Managing the toothless period

Between the implant placement and the final crown, the patient is without a tooth in that area. This 3-month period (or 4 months for infected sites) is managed differently depending on the visibility of the area.

Non-visible zone (molars, posterior premolars)
No temporary tooth is generally necessary. The absence of the tooth is not visible when smiling, and masticatory function is maintained by the other teeth.

Visible zone (incisors, canines, anterior premolars)
A single-tooth removable appliance is generally proposed. Simple to wear, it masks the absence of the tooth when smiling. It is removed for brushing and at night.

Special cases with high aesthetic demand
In certain situations where aesthetic requirements are very high, and when neighboring teeth have already been treated (meaning they already have composites or restorations), a Maryland bonded bridge may be considered. This is a more complex solution that adds to the prosthetic phase workload but offers an optimal aesthetic result during the osteointegration period. This solution is discussed on a case-by-case basis during consultation.

Journey Summary

  • Day 0: implant placement (30 minutes, local anesthesia)
  • Day + 1 week: healing check-up
  • Day + 3 months (or 4 months if the site was initially infected): digital impression with scanbody (30 minutes)
  • Day + 3 months + 1 week: placement of the final crown (30 minutes)

Total: 4 visits over approximately 3 months.

Why a digital workflow makes the difference

Choosing digital dentistry for implantology brings several concrete advantages.

No traditional impressions
The intraoral scan completely replaces silicone-based impressions. Significantly higher comfort for the patient, no material to bite into for several minutes, no risk of gagging, and no distortion related to removing the impression.

Superior precision
The digital capture of the implant position via the scanbody is highly precise. It allows for computer-aided design that takes all parameters into account (occlusion, neighboring teeth, prosthetic emergence).

Complete documentation
Digital data is preserved. If needed (crown breakage, replacement years later), the fabrication of a new crown can be restarted quickly from the existing file.

Costs

At Dental Swiss Clinics, implantology rates are as follows:

  • Straumann implant placement only: CHF 750
  • Implant crown: CHF 1,300
  • Implant + crown (complete package): from CHF 3,200

To learn more about our rates, see our Dental Care Rates page.

Frequently Asked Questions

How long does the complete journey take?
Approximately 3 months for a healthy healed site, 4 months for a site that had a prior infection, with a total of 4 visits.

Is implant placement painful?
No. The placement is done under local anesthesia and is generally painless. Recovery is straightforward for the majority of patients, with moderate swelling for a few days and no significant pain.

Why wait 3 months between placement and the crown?
This is the time required for osteointegration, which is the biological fusion between the titanium implant and the bone. This process cannot be artificially accelerated and is essential for long-term success.

Can I have a temporary crown on the day of implant placement?
Rarely. Immediate loading exists but requires very favorable clinical conditions. In the majority of cases, a delayed approach remains safer. For the waiting period, a removable appliance or a Maryland bonded bridge can be offered depending on the area and aesthetic needs.

What is the difference compared to a bridge?
An implant replaces only the missing tooth without affecting neighboring teeth. A bridge requires grinding down neighboring teeth to turn them into abutments. To learn more, see our article Implant or bridge, how to choose.

How long does an implant last?
A correctly integrated and well-maintained implant can last several decades, often a lifetime. The crown covering it may need to be replaced after 10 to 20 years depending on use, but the implant itself remains in place.

For an evaluation of your situation and a tailored plan, contact Dental Swiss Clinics in Montreux at +41 21 966 54 54 or via WhatsApp. Monday from 8:00 AM to 8:00 PM, Tuesday to Friday from 8:00 AM to 6:00 PM.

Scroll to Top